Arlo Camera Not Connecting to Wi-Fi ( 6 Issues Fixed)
Using your Arlo camera for home security and being relaxed, but suddenly this relaxation becomes frustrating when you face the issue of the Arlo camera not connecting to Wi-Fi.
Well, I know very well this feeling that’s why in this article I am going to tell you the solutions to this problem.
First, confirm that the Wi-Fi is connected. Make sure the cameras are discoverable and that there is no issue with your account.
But, this isn’t it as to solve this issue, you need to know the details of problems and their solutions.
So, let’s get started!
Why My Arlo Camera Is Not Connecting to WI-FI?
Talking about the reasons, there can be many reasons for the Arlo camera to not connect to the Wi-Fi, and the most common reasons among them are:
- There is an issue with network settings
- The camera is placed at a large distance
- The Wi-Fi signals are weak
- The App needs an update
- The device needs a reset
- There is some technical issue
How Can I Solve the Issue of Arlo’s Camera Not Connecting to WI-FI?
As we know the potential reasons now, but this isn’t it as you need to know the detailed guide on solutions to solve this issue:
There is an issue with network settings
Only the 2.4GHz band is compatible with Arlo cameras. If your router only broadcasts a 5GHz network, or if it broadcasts a dual-band network with 2.4GHz and 5GHz, be careful you connect the camera to the 2.4GHz network.
Consult the camera’s datasheet for more compatibility information. 5GHz networks are supported by some Arlo devices.
Solution:
Make sure that 2.4 GHz broadcasting is selected on your network, follow the following steps to do so:
- Just type “192.168.0.1” to access the router’s management panel!
- Access the router’s control panel!
- Navigate to Wi-Fi settings under Advanced Settings!
- Then choose “Set Up New WiFi”!
- Verify that the 2.4 GHz frequency is chosen!
- Your base station and smartphone must be connected to the Wi-Fi that you create!
The camera is placed at a long distance
Moving further away from the main router or encountering more barriers causes the signal to deteriorate.
The camera should always be set up near the router before being moved to the installation.
Solution:
- Make sure the internal and external cameras receive a robust network signal at the final installation site to prevent offline problems!
- Upgrade to a mesh network architecture or install a Wi-Fi extender if your network needs a boost!
- Avoid anything that might block the Wi-Fi signal, such as thick walls, metal items, or other electrical gadgets!
The Wi-Fi signals are weak
The Arlo camera requires a strong and reliable Wi-Fi signal to connect.
If the camera is too distant from the Wi-Fi router, there are obstructions in the path, or other devices are interfering with it, the signal strength may be affected.
Solution:
- Check to see whether other devices using the same network are operating appropriately!
- Reboot your router and modem by turning them off for roughly 30 seconds and then back on!
- Check the Arlo camera’s Wi-Fi signal strength and make sure it is inside your network’s coverage area!
The App needs an update
Your camera might not be able to connect to your Wi-Fi network if you are using an out-of-date app.
So make sure that you are using the most recent version of the app or firmware.
Solution:
- Go to Settings > My Devices in the Arlo app, pick the camera that is having connectivity problems, and then look for any available firmware upgrade!
- Visit the app store on your smartphone to see whether the Arlo app has an update available!
- Clear the cache when verifying the app’s version to refresh its memory and clean out congested log files!
Your device needs a reset
When the camera is factory reset, the default firmware is restored and any corrupt configuration files that can interfere with connection are removed.
Usually resetting the device can resolve most of the issues that stop the device to work properly.
Solution:
- Depending on the model of your camera, you might need to remove it from its housing to access the sync button!
- Press and hold the sync button for 15 to 20 seconds to restart the camera!
- Release the button when the camera LED starts to blink, then wait for the reset procedure to finish!
- The camera is now reset and pairing mode is turned on the camera!
There is some technical issue
If none of the above solutions solve your issue, then there are chances that there is some kind of technical issue with your device.
Solution:
- You can contact the customer support team of Arlo Camera, and they will help you with professional advice!
Frequently Asked Questions
The Arlo camera I have displays “Connection Failed.” How can this be fixed?
Check to see if your Wi-Fi network is active first. After that, try restarting the camera and reconnecting it to Wi-Fi. Check for updates if the issue still exists, or get in touch with Arlo support.
Can changing the name of my Wi-Fi network affect the connection to my Arlo camera?
Yes, disconnecting your Arlo camera is possible if you change the Wi-Fi network name. The new network name and password must be entered in the Wi-Fi settings of the camera.
Can problems with my Arlo camera’s Wi-Fi connection be brought on by a bad power source?
Yes, the camera might not be able to keep a steady Wi-Fi connection if it isn’t getting enough power. Make sure you’re using the right cable and power adaptor.
Conclusion
Sometimes, weak signals, network issues, the large distance between router and device, and some technical issues can cause the issue of the Arlo camera not connecting to Wi-Fi.
If you try placing the router closer to the device, checking Wi-Fi and network settings, try updating and resetting, you can easily solve this issue.
Related Posts
