Blink Camera Red Light When Recording (Try These 7 Fixes)
In the beginning, I excitedly put up my Blink camera and noticed the flashing red light because I thought it will turn off on its own.
But I realized something more serious than a standard red light. So I decided to look into it more to make sure everything was working properly, and that’s what I am going to tell you.
This is a sign that the batteries need to be replaced right away since they are beginning to lose power. If you don’t, the camera can die earlier than you think.
In this article, I’ll explain the main reason for the blink camera’s red light when recording, and its solution as well, so let’s get started!
Why Is My Blink Camera Have a Red Light on While Recording?
First of all, let’s see the reasons for the flashing red light of the blinking camera while recording so that it will make it easier for you to solve the issue.
- The battery is going to die
- The Wi-Fi signals are weak
- There is some hardware issue
- It has detected motion
- It needs a refresh
- It needs a reset
- There is some technical issue
How to Solve the Issue of the Flashing Red Light of the Blinking Camera?
As now you are aware of the common reasons for this issue, let us now move towards the solution of the issue of flashing red light on the blinking camera while recording.
The battery is going to die
The camera may blink red to show that it needs to be charged when the battery level is low. Battery life for Blink cameras is normally two years, however, use may affect this. You may also add several accessories to your Blink camera to increase battery life.
Solution:
- Charge the battery of the blink camera!
- Think about replacing the batteries with new ones if charging doesn’t work!
- If still replacing the batteries doesn’t solve your issue, you can think about contacting the customer support of Blink Camera!
The Wi-Fi signals are weak
Checking your internet connection should be one of your first actions if your Blink camera is flashing red because of a bad Wi-Fi connection.
Solution:
- Ensure that your Wi-Fi network is operational and that your camera is in the router’s coverage area!
- Try relocating the camera closer to the router or adding a Wi-Fi range extender if the connection is shaky!
- Try reconnecting the camera to the network using the Blink app if the Wi-Fi network is operational!
Follow these steps to connect your device to the internet:
- Install the Blink mobile app on your phone or tablet!
- Launch the Blink app on your phone!
- In the app, select the “Network & Connectivity” tab!
- To locate the accessible networks, click the “Search” button!
- Enter the Wi-Fi password after choosing your network!
- Whenever a confirmation password is requested, choose “Confirm”!
There is some hardware issue
When a blink camera flashes red, there can be a hardware issue.
This problem may arise if the camera is broken or not operating properly.
Solution:
- There can be lenses issue or camera circuit issues, so it is advised to buy a new camera in this case!
It has detected motion
This is a camera feature rather than a mistake. The camera will flash red if its motion-detecting system picks up movement.
This can potentially be the rationale behind this particular sequence.
Solution:
- In this case, there is no need to find a solution as this is not a problem!
There is a need for a refresh
When it senses motion, the LED can flash RED, as seen on the majority of Blink Cameras. However, the flashing persists and typically denotes problems with motion detection.
Therefore, it would be essential to examine and update the Blink Cam’s motion detection settings.
Solution:
Follow the following steps to get your motion detection feature to be refreshed:
- Open the Settings tab of your Blink Cam by logging into the Blink app!
- Choose Motion Settings!
- Switch the Motion Detection setting ON and OFF!
- To implement the changes, close the Settings menu and restart the camera!
The device needs a reset
Sometimes Blink camera issues are simply not worth trying to figure out.
It’s always safe to just reset your camera if it is suddenly blinking red. This may frequently save you a tonne of effort when troubleshooting errors that could have only been bogus.
Solution:
- Press the reset button hole on the underside of your Blink camera using a smartphone sim ejector pin, thumb tack, or any other small, pointed tool!
- Continue pushing until the red light turns blue and green, indicating that the reset process has begun!
There is some technical issue
If none of the above solutions fail for you, this means that there is some kind of technical issue that can be solved by professionals only.
Solution:
- You can try contacting the customer support team for help!
Frequently Asked Questions
Is it possible for me to view the recorded video even if the red light is not blinking?
Yes, even when the red light isn’t actively blinking, you may still see the captured film in the Blink app’s video history.
Even if my camera is not linked to the internet, would the red light still blink?
Only when the camera is online and actively recording will the red light begin to blink. The red light won’t be on if your camera is unplugged.
Can I set a timer for when the camera records and shows the red light?
Yes, you may use the app to plan recording times for your Blink camera. Only when the camera is actively recording following the predetermined schedule will the red light flash.
Conclusion
The red light of the blink camera is not normal, as there is a particular issue causing the blink camera to blink red light while recording.
Just make sure to follow the above-mentioned solutions like checking batteries, internet issues, try resetting or refreshing.
Related Posts
