Ring Doorbell Light Not Spinning After a Hard Reset (Quick Fixed)
One of the most well-known video doorbells on the market right now is the Ring Doorbell.
But the common problem faced by the owners of the Ring doorbell is that the Ring doorbell light not spinning after a hard reset, so what should I do?
The most common reason the Ring Doorbell stops spinning or stops functioning is a wifi connection problem, and also it will not be able to use features like view who will be at the door if it is not linked to the Ring application.
In this article, I’ll explain all the reasons and their solutions in detail.
So, Let’s go!
Why Is My Ring Doorbell Light Not Spinning After a Hard Reset?
There can be many possible reasons that can cause your Ring doorbell to stop spinning light and common ones are:
- There is an issue with the battery
- There is an issue with the Wi-Fi signals
- There is an issue with the power
- Your Ring doorbell needs to be charged
- There is some technical issue
How to Fix My Ring Doorbell Light Not Spinning Issue?
Here are the possible solutions that you can apply to your Ring doorbell so that it can again start spinning white light.
The issue with the battery
There are chances that the light is not spinning because there is an issue with the battery.
Keep in mind that the battery must be charged to set up the Ring Doorbell!
Due to the absence of a built-in battery, this approach works with all Ring doorbells except for the Pro and Elite models.
And, if charging the battery doesn’t work for you, then try replacing it.
Solution:
To replace the battery in your Ring Doorbell, follow the steps:
- To remove the cover, press it with your thumb after removing the screws at the bottom of the faceplate!
- Carefully detach the device’s body from the faceplate!
- Press the battery’s black tab when removing the battery!
- Slide the battery back into the faceplate after making sure it is charged!
When you do this step, hopefully, the issue is resolved. Once you’ve finished with this process, don’t forget to configure your Ring Doorbell.
However, you might need to change the battery in the Ring doorbell if you notice a steady white light on the ring.
There is an issue with Wi-Fi signals
For Ring Doorbell to function correctly, you need a strong internet connection.
Continuous signals must also be present during the installation procedure.
Solution:
- Verify that the credentials saved in Ring Doorbell are accurate and secure first!
- Furthermore, for a good connection, it has to be close to the wifi router!
- If not, download Ring Chime Pro to improve signal reception on your smartphone.
- Additionally, if the white light on the ring doorbell is not spinning, you may restart your wifi router to begin the setup procedure again!
There is an issue with the power
The Ring Doorbell has to be powered by a source with a voltage range of 16 to 24 volts.
A Ring Doorbell is often wired with the wire service of an outdoor doorbell.
Depending on the circumstance, how much the Ring Doorbell is used, and the tasks involved, it can be essential to use more power.
Solution:
- Open the Ring app’s Device Health tab!
- Find the voltage setting!
- Check to see whether this Ring Doorbell has adequate power!
- The Ring Doorbell has no power problems. Make sure the voltage option reads correctly, or a minimum of 3,900mV, whenever you choose it!
Your Ring doorbell needs to be charged
The rechargeable battery may go months between charges with moderate use.
This is governed by a lot of environmental factors in your house, such as the weather and the quantity of activities that are seen.
Solution:
- Take out the security screws holding the doorbell’s base and lift it up and away from the mounting bracket.
- Connect any micro-USB charger to the Ring’s charging port on the back.
- Your battery is fully charged when the circle-shaped light on the front of your Ring device is a solid shade of blue.
- Reinstall the Ring unit to the mounting bracket using your security screws.
- Press the front button on your Ring Video Doorbell to test it.
There is some technical issue
If none of the above-mentioned solutions solves your problem then there are chances that there is some kind of technical issue that can be solved by professionals.
Solution:
- Contact the customer support team of Ring Doorbell, and ask for help!
Frequently Asked Questions
How can I determine whether my Ring doorbell has power?
Make sure the battery is charged and placed correctly if your Ring doorbell runs on batteries. If it is hardwired, verify sure the power source is operating properly and inspect the wiring connections.
What does a Ring doorbell hard reset entail?
To do a hard reset, press and hold the reset button on the Ring doorbell for about 20 seconds, or until the doorbell’s light begins to rotate.
What should I do if the electricity to my Ring doorbell is out?
Charge or swap out the battery if your Ring doorbell runs on batteries. If it is hardwired, make sure the power source is working properly by checking the wiring connections, circuit breaker, or transformer.
Conclusion
Sometimes, Ring doorbells can cause some problems as I mentioned above, but you need not worry as the above-mentioned solutions can work magic for you.
Try checking the batteries, power, Wi-Fi, and charging, and if not, contact the customer team of Ring doorbell and the Ring doorbell light will again start spinning.
Related Posts
