Vizio TV Won’t Turn on Power Light Fades Off – 5 Ways to Fix
VIZIO has established itself as one of the top companies in home entertainment and is also very well-known for its premium smart TVs But occasionally even the most dependable technology can have problems as a result leaving users angry and looking for fixes.
The power light fading out and the TV not turning on is one of the typical issues for VIZIO TV users but Do not panic if you find yourself in this situation.
I’m just here for you to provide practical advice on how to handle this specific problem.
What to Do if Vizio TV Won’t Turn on Power Light Fades Off?
The most current VIZIO TV releases usually include white LED indicator lights which are intended to fade off once the TV comes on but surely you can tell there’s a problem if the TV still doesn’t turn on even after the power light fades.
If the power light on your VIZIO TV goes off but the TV won’t come on you should surely proceed to check to see if the backlight is damaged by shining a light over the screen to see if an image appears and If so the backlights or inverter inside the TV’s chassis need to be replaced.
To be sure the issue isn’t being caused by something else let’s attempt a few fast steps to solve this issue before I go into further depth on how to achieve this.
Reset the VIZIO TV
Power cycling your TV despite it might seem like a simple remedy is frequently the most effective approach to fix a broken or problematic VIZIO TV.
Modern electronics make it conceivable for a problem to be caused by anything stuck in your TV’s flash memory or by a glitch that can’t be fixed by turning the device on and off.
Any non-permanent memory difficulties will be resolved by restarting your TV without affecting your customized settings and you can do so by following these simple steps:
- First and the very obvious step that you all are already aware of is to shut off the TV.
- For at least 15 seconds make sure to depress the physical power button on your TV to remove any remaining energy from the capacitors.
- After then you just have to make sure that you disconnect your TV for at least 30 minutes.
- After that you have disconnected your TV for 30 min all you have to do is to reconnect the plug and turn the power back on.
Note: Make sure you press the actual power button on your TV and not just the one on the remote and also that you wait 15 seconds before pressing it again.
Check the Settings on Your TV
Not many people are aware of this but let me tell you the major reason because of why the gadget won’t switch on or wouldn’t offer any display might be your TV settings.
First and foremost you have to make sure the firmware is current and then Launching the Settings > System menu and selecting the Check For Updates option will allow you to verify this.
If that isn’t the issue then there are chances that the CEC settings must be interfering with your TV’s auto-power-on function so You must locate the CEC option under the System menu to disable this technique.
In addition, the power mode of the VIZIO TV may be modified through its settings and you have to Use Quick Start mode to set your TV to automatically turn on.
The Issue With the Remote
There are also chances that the remote control is the problem in this instance so you may need to address the remote control if you want to solve this issue.
Therefore you must first remove the remote control and inspect it as well as its batteries so you must next remove the batteries and inspect them as well by switching the battery cells around.
By pushing the button the TV is switched on if it has an impact and if not you have to take the batteries out and replace them with fresh ones and if you do the TV starts functioning properly.
Examine the Power Cord for Damage
If you didn’t check when you changed the wall outlet your TV is hooked into make sure that you should do it right away to make sure the power cable isn’t harmed.
Look for kinks and knots in the power line in particular since these can harm the copper wires physically and by raising electrical resistance which creates heat and can lead to damage that isn’t always visible.
It may be a good idea to use a new power cable if you have one or you can also borrow one due to potential damage within the cable that you cannot see because of the protective coating.
Analyse Any Backlight Issues
You might need certain tools and new components to complete the job because the lighting on a VIZIO TV is one of the most typical areas for failure.
Typically, the power board or the voltage inverter (depending on the specific model) fails which results in the backlight losing power but not necessarily failing the backlight itself.
You can also watch this video.
Frequently Asked Questions
What should I do if none of the following fixes work to get my VIZIO TV to turn on?
It is advised to get in touch with VIZIO customer service if you have tried all the troubleshooting techniques described in this article and your VIZIO TV still won’t switch on.
Can a surge or power loss make my VIZIO TV unresponsive?
Yes, power outages or power surges may have an impact on the operation of TVs and other electronic gadgets so It is advised to disconnect your TV in these situations, wait a few minutes, and then plug it back in.
Is it okay to try to repair the problem by resetting my VIZIO TV?
Yes, generally speaking, restarting your VIZIO TV is a secure troubleshooting technique to attempt and It aids in removing any transient glitches or software problems that might be the root of the problem.
Conclusion
It might be upsetting when your VIZIO TV won’t come on and the power light goes out but it is obvious that it doesn’t have to be a lifelong problem.
You may successfully diagnose and solve this problem by comprehending the possible reasons and implementing the suggestions I made previously in this article.
There are several actions you may take to restart your VIZIO TV, including resetting the TV, checking the power source, or also contacting a specialist if all of these ways won’t work for you.
Related Posts
