Blink Camera Not Detecting Motion (6 Issues Fixed)
In terms of battery life, motion detection, video quality, and disruption from weather, the blinking camera is far more effective than conventional security cameras.
But what you can do if your blink camera not detecting motion?
Check to see whether motion detection is enabled and the Blink camera is armed if your device isn’t picking up any motion. Check secret zones and incorrect activities next and You could also look at Wi-Fi and IR problems.
Now I will give you the best solution to this problem of blink cameras in detail.
Why My Blink Camera Is Not Detecting Motion?
Here are some potential reasons that can cause the blinking camera to stop detecting the motion:
- Large distance between the camera and the sync module
- The permissions need to be enabled
- There is an issue with the battery
- There is an issue with the settings of the blinking camera
- The “motion detection” is turned off
- There is a problem with activity zones
How to Fix the Blink Camera Not Detecting Motion?
Here are some easy solutions to one of the common problems that can cause the blinking camera to not detect motion.
Large Distance Between the Camera and the Sync Module
The camera’s brain is the Sync Module as the sync module is a part of the camera that interacts with the camera in real-time and gets data from the Blink servers over the Wi-Fi network.
The camera would be unable to perform motion detection if this component were placed too distant from the camera since the sync module handles that task.
Solution:
- To resolve this, consider moving the sync module closer to the camera to enhance communication signals and enable correct motion detection.
- If you just have one Blink device, you may also connect the sync module to the camera via a variety of methods.
The Permissions Need To Be Enabled
The Blink devices’ firmware and software are updated regularly and these upgrades can occasionally result in the device’s permissions being reset and the camera’s features being disabled.
Solution:
- The camera must have permissions enabled to work properly.
- If you discover that certain permissions are disabled, you must manually enable them from the Blink app for the camera to function as you want it to.
- If you make any further changes, make careful to save them because they are not saved automatically.
Issue With the Battery
For a very long time, there have been reported battery problems with Blink security cameras as only two batteries may be installed at once due to the camera’s demanding workload.
Therefore, if you have any battery issues, don’t be alarmed.
Errors in the configuration of the motion detection feature might be brought on by low or damaged batteries in Blink cameras.
Solution:
- The most typical remedy for the battery problem is to replace the batteries with fresh ones.
- When discussing power concerns, it should be mentioned that the power conservation mode occasionally activates, disabling the motion sensing system.
- The power-saving mode should thus be turned off to ensure that motion detection functions properly.
Issue With the Settings of the Blink Camera
Incorrect camera settings are a typical cause of a Blink camera not detecting motion.
Users should verify the motion detection settings in the Blink app to make sure the camera is configured correctly.
Solution:
- This entails tweaking the motion detection function, creating activity zones on the camera, and altering the sensitivity slider on the camera.
- Additionally, make sure the device has a steady internet connection and that the camera is securely attached to the sync module.
The “Motion Detection” Is Turned Off
Motion detection may not always be activated when your system is armed.
The motion sensors on your cameras should be turned on by default, but they could have been toggled off at some time.
Solution:
- If motion detection is enabled for that camera, the symbol will be blue; otherwise, click it. The motion detection feature of a Blink camera is activated by the running man symbol.
- On the camera’s settings page, by selecting the symbol with three horizontal sliders next to the running man icon for the camera, you may access this page.
There Is a Problem With Activity Zones
You may set your Blink camera to ignore motion in certain areas of the field of vision.
The Activity Zones function is a terrific method to prevent receiving notifications every time a car passes by or when a particularly active tree starts to rustle.
On the other hand, if not many zones are active, your camera may miss an opening door or an intruder.
Solution:
- Your Activity Zones may be modified from the Camera Settings menu as when you click the grid icon, a new screen will appear.
- The Blink camera settings activity zones button on each rectangle on the Activity Zone screen may be clicked to activate or disable the associated activity zone.
- If your camera has been having trouble detecting motion, I advise keeping as many zones active as you can.
You may watch this video!
Frequently Asked Questions
Does the Blink camera have a Wi-Fi or Sync module connection?
Blink cameras link to the Blink sync module, which then connects to your home Wi-Fi router. The camera cannot connect to the internet without the sync module. This implies that without a sync module, your Blink camera is almost worthless.
Why isn’t the video on my Blink camera showing?
Make sure your WiFi is operational if you want to use the Blink app to watch the camera stream. For the camera to operate properly, there must be three bars.
How far can a Blink camera see movement?
Depending on the type, blink cameras have a range that varies, but in general, they can detect motion up to 20 to 30 feet away.
Conclusion
I hope now you know why the blink camera not detecting motion and you can easily solve your relevant issue by placing the camera near the sync module, or by enabling permissions, cross-checking the batteries, and checking settings and activity zones.
If still your issue is not resolved then don’t hesitate to contact the customer team of Blink Camera.
Related Posts